You are currently browsing the category archive for the ‘Tutorials N Crafts’ category.

Please View my New BLOG/SITE for the most recent post


Sew many Wonderful Sewing Tutorials at

These fabric pom poms from Ashley of Dolci Odille are shown as different ways to accessorize at a wedding. They’d also look beautiful hanging in a room! [via Sweet Jessie]

DIY Fabric Poms
DIY Wedding

We recently created this fabric pom pom as a tree topper for an inspiration shoot over at Design*Sponge, but it’s a great DIY project for a wedding as well. They have so many creative uses… hung above tables, chair aisle decor, or an alternative to the expensive flower poms that flower girls use to walk down the aisle.

-Ashley of Dolci Odille



Supplies: Fabric, scissors, hot glue gun, and chinese lanterns.


Step 1: Cut circles out of fabric.

Step 2: Fold the circle in half and put a little hot glue on the center, then fold over to secure.

Step 3: Apply more hot glue to the bottom of the folded circle.


Step 4: Press the bottom of the folded circle with the hot glue onto the chinese lantern.

Step 5: Repeat these steps until the whole lantern is covered. Once finished, attached some fabric to the metal frame of the lantern to hang.


Project created by Dolci Odille

ABC card

Thank you Grace for letting me spend the week here! For my last post I
decided to make an ABC birthday card with a PDF you can download and
make yourself.

We have a birthday tradition in our family we’ve been doing since we
were kids. We go around the dinner table and each person takes a letter
of the alphabet, and we say something nice about the birthday girl/boy.
A is for Artistic! B is for the Beautiful! We go around and around the
table until we get to Z (which can be a difficult letter, you have to
get creative). You can mention a favorite memory, or something that
reminds you of that person, but it has to involve your letter.

My family is now scattered across the country. So I thought this ABC
card might be a nice way to keep our tradition going, even when we’re
apart for birthdays. Coming up with 26 things on your own can be tough,
so I only recommend making this card for people you know quite well!

To get started: Download the PDF which includes
all 26 letters. For each card you’ll need seven sheets of cardstock.
Print your cards on a color printer. Cut each page into 4 cards by
following the trim marks. Write one special trait or memory for each
letter. Wrap with ribbon and mail to the birthday boy/girl in a sturdy
envelope. It’s almost as good as being there in person.


This is a great little tutorial to make your own gift tags for the holidays. All you need is some paper, a printer, a few cutting tools, some scrap fabric and glue.

last-minute christmas tags

I know everyone is busy wrapping (or perhaps still finishing) a few gifts. I’m here to help! These gift tags are a great way to use leftover fabric scraps. First, download this template and print it on some white cardstock.

Here’s what you need: your printed template, a ruler and an x-acto knife, a bone folder (in order to get nice crisp folds), a cutting mat, glue (spray adhesive or glue stick), 1.5” circle punch (or you can cut the circles with your x-acto knife.. be careful!), a few cute fabric swatches (cut to roughly 1.75” squares), and a hole punch.

STEP 1: Cut out your tags (each template makes four tags) with a ruler and an x-acto knife, using the guides on the template. I cut the top and bottom horizontal lines first, and then the vertical lines.. do not cut through the paper top to bottom, you want to stop shy of the edge of the paper so you keep the border and your guide marks intact.

STEP 2: Take the four cards and punch out the 1.5” circle, as marked on the template (your circle punch will be slightly larger than the circle on the template). Line it up as closely as you can.

STEP 3: Apply glue to the entire wrong side (or back of the card) especially the edges. Pick your fabric swatch and affix it to the back of the card, wrong side up, making sure it covers the entire punched circle. (The right side of the fabric should be face down).

Fold the card in half to sandwich the fabric, use a bone folder to get a nice tight fold (or your fingernail). Rub the card all over, making sure the glue is spread evenly over the entire card. Punch holes where indicated. Add string or ribbon and enjoy!

PrintView Printer Friendly Version

EmailEmail Article to Friend

1. UPVC pipe (150mm diameter and 350mm length)
2. 2mm thick cardboard
3. Wrapping paper of your choice (I got this from Ikea)
4. Craft glue
5. Craft knife, steel ruler and cutting mat
6. Scissor and a pencil
7. A saw with a suitable blade to cut plastic material (I used electrical saw in my workshop)
8. Sand paper

Step 1
Cut the Pipe to your desire length, a body and a cap (200mm and 50mm). Sand-off the sharp edges from the cut.
Trace the outer diameter of the pipe on the 2mm cardboard, make 2, cut them out for the top and bottom cap.
Cut 2 pieces of 30mm wide and 1 piece of 10mm wide strips from the 2mm cardboard. The length must be

Step 2
Cut wrapping paper for the top and bottom caps.
Apply glue on the pipes surface. Wrap the wrapping paper around it and seal the open end in by putting some glue there.
Fold the top end of the body and both ends of the cap in and glue it.

View complete Tutorial Here:

View complete Tutorial Here:

Original Post found at

Tutorial by Leah Payne -look for her on Blogger
Sling Your Baby

Babywearing is a great way to connect with your baby, as well as have your hands free to get things done. If you are interested in slings, or would like more information, contact me by e-mail at:

How to Make a Pouch Sling

Ta-Da! I have finally made a video on how to make a pouch sling. Here are the materials you will need:

2 yards of pretty fabric (this could be just about anything: calico, corduroy, silk brocade, etc)
2 yards of baby flannel in coordinating color
A friend to share your fabric with (this will make two slings)

**update: After a few questions about this, I wanted to let everyone know that you do not HAVE to use baby flannel for the lining. You can use the same fabric you are using on the outside or anything else you’d like. Also, if you want your pouch to just be one layer, choose a fabric that is double sided (like seersucker) and just hem the edges after you cut it down the middle. I choose baby flannel b/c it is soft, that’s the only reason really**

The video will walk you through all the steps. Please let me know if you need more help. Good luck!


After a LOT of trouble shooting I got my free pattern with instructions. Can’t wait to make my first one!

Free pattern: Snuggler infant swaddler


snuggler_patternThis Snuggler infant swaddler is just one of the projects featured in Lotta Jansdotter’s Simple Sewing for Baby: 24 Easy Projects for Newborns to Toddlers.  You can download the pattern for the swaddler for free from CraftzineGo to the free pattern.

Technorati Tags: , , , , ,


  1. Rachel Low on December 16, 2009 8:00 pm

    Hello Yikes it’s already December. I have the same freezing problem Can anyone email me the Pattern I would LOVE to make it for my baby Due the end of Jan 2010.

    my email is

  2. Rachel Low on December 17, 2009 5:51 am

    Thank you for replying so quickly I can’t wait to try it out.

  3. Rachel Low on December 17, 2009 7:37 am

    There is a pattern with instructions available here

    I’m not a good enough sewer to figure it out myself with no instructions.

    People seem to have trouble downloading that one as well.

    but after reading the comments I was able to download the pdf.

    After a little bit of a wait the PDF even loaded properly in a new window when I used internet explorer rather than firefox.

    If it still doesn’t load for you try the direct download like she says.

    In INTERNET EXPLORER right click on the download link when the window pops up Choose “save target as” choose a destination folder and voila you have it saved on your computer. ;)

    As far as printing goes, I had to Open the PDF file with ADOBE ILLUSTRATOR one page at a time. In adobe illustrator printing options include “tile” “full pages” Your pattern will print out on (4) 8/1/2 x 11 sheets. According to adobe’s website that option should be available in acrobat, but it is not available for me. Maybe you need to have Acrobat Professional not just the reader.

    So like I said I had to use “open with” to open the PDF in another ADOBE program, WORKED for me with Illustrator, you should try it in PHOTOSHOP or INDESIGN if you have one of these programs.

  4. Rachel Low on December 17, 2009 7:44 am

    This is why we can’t print large pages. You need the full version of adobe acrobat not just the free reader.

    Hi Keith,

    The tile print feature is part of Acrobat not Reader, which is why you do not see it in the Adobe Reader print menu. If you’re interested in testing the tiling capability try downloading a 30-day trial of Acrobat 9 at:

  5. Rachel Low on December 17, 2009 7:53 am

    If you are lucky enough to get the pattern to load in Internet Explorer the printing options were available for me to tile large pages. So print it out directly from the web browser. Probably a good idea to make sure you have the latest version of internet explorer and the adobe reader plugin
    good luck every one

  6. anneweaver on December 18, 2009 6:59 am

    Thanks for posting this! This download has been giving people lots of trouble, but your research and explanation will help make it easier. You rock!!

This crafty mamma made felt crayon holders as a party favor for her daughter’s birthday. How clever!

So Cute


(I used the inexpensive craft felt found in 9″X12″ sheets at craft stores, often the size slightly varies. I found it okay to make minor adjustments by slightly stretching while sewing and cutting)

2 pieces 6″ X 12″ (lining, outside)

1 piece 3″ X 12″ (pocket)

1 – flower shape

1 – circle for center of flower

1 button with shank

1 – 12″ piece of ribbon

1 – 11″ piece of ribbon

8 –  Crayons

1 – 3″ X 5″ 80 Sheet Memo Pad


How To Make A Felt Crayon and Notepad Holder

Kanzashi is another beautiful Japanese art form which started a long time ago as hair ornaments and adornments for Geisha women. These beautiful crafts are silk folded flowers. This Japanese tradition has survived until today and has gained popularity over the years in the crafting community. If you google enough you should be able to find yourself a tutorial. But nobody can do it like the Masters and luckily enough for us there are still a few Kanzashi masters left today. Who continue to bless us with their creative intricate and breathtakingly beautiful designs.

AtelierKanawa’s Shop

AUTHENTIC Tsumami Kanzashi, Kimono, Chiyogami, Katazome

Master Kuniko Kanawa Creation

Master Kuniko Kanawa Creation

I have made a few attempts at constructing a simple ume style blossom. It took a few tries, but now I have two keepers although it’s still not perfect. I had to add additional petals to get my flowers to look nice. 😉 It’s good to use fabric scraps to practice. I had to start out with 4 inch squares to get a hang of the folds, and then I moved on to the recommended 2 inch squares.  The experience is much like folding origami except harder because the fabric is floppy and you don’t get a nice crease unless you use starch. Since I constructed a few flowers all I need now is the finishing touches, a center bead or button and maybe a bobby pin or alligator clip so I can sport my very own Kanzashi creation.

I’m so inspired by this new craft and once I get the folding down I hope to be able to create my own unique designs 😉

My first Kanzashi Flowers

My first Kanzashi Flowers

Kanzashi Flower Unfinished

Kanzashi Flower Unfinished

Little Brown Kanzashi Flower Unfinished

Little Brown Kanzashi Flower Unfinished

Delicate Kanzashi

Delicate Kanzashi

Once I get some beads or buttons to match I’ll upload my finished Kanzashi Project.

Fabric covered buttons are so fun and easy to do too! Too bad the smallest size walmart had as 3/4″. Here are the pictures of my finished Kanzashi.

Large Flower Made with 4" petals

Large Flower Made with 4" petals

Three Finished Kanzashi Flowers

Three Finished Kanzashi Flowers

I’m excited to do more. Still need to attach these to clips or pins.

Update: Kanzashi for Christmas

Kanzashi Christmas Tree

Kanzashi Christmas Tree Tutorial

Includes pattern and video of how to fold round and pointed kanzashi petals

Really great step by step instructions with Photos.

Wife, Mother, Artist

Share this Blog!

Bookmark and Share



Thanks for Stopping by

Flickr Photos